Vibration

Vibration and Shock Testing Guidebook

The Vibration and Shock Testing Guidebook is now available to help you work through compliance against vibration and shock testing.

 

You don’t need to be an expert to get your product successfully through testing, but you do need to know some fundamentals about vibration and shock testing. Our Vibration and Shock Testing Guidebook has been written to give you the basics without swapping you with the complexity. Our goal is to help you get your product successfully through the process of compliance testing!

Proven Vibration and Shock Testing Process

Our Vibration and Shock Testing Guidebook  gives you clear advice on the vibration and shock test process required for most products. We set out a standard test model, walk you through each step, and show you how to adapt it to your products requirements. The standard model consists of a six (6) step process :

  1. Write Test Specifications
  2. Writing Test Procedures
  3. Performing Pre-testing
  4. Performing Type Approval Testing
  5. Writing the Test Report
  6. Assembling a Compliance Folder

All Typical Vibration and Shock Tests

Importantly we also give you an introduction to the most typical Vibration and Shock tests. This allows you to properly estimate the costs and schedule of vibration and shock testing and to construct test harnesses and jigs. We cover the vibration and shock tests you are most likely to encounter, including :

  • Visual inspection and performance tests
  • Shock and bump tests
  • Rough handling (drops and free fall)
  • Random functional vibration
  • Simulated long-life vibration

You will also learn how to read through the standards, write test procedures and assemble your successful compliance folder. For each test we give you an overview of the procedure and the equipment used.

Excerpts from Vibration and Shock Testing Guidebook

We have provided these excerpts from the Vibration and Shock Testing Guidebook to give you an appreciation for the quality of the content and to highlight that the book is aimed at helping you successfully complete the testing process. We leave detailed mechanical engineering theory to the specialists and help you get the job done as quickly as possible.

Vibration Testing - Equipment Setup

Shaker Table Equipment Setup

Inspection Tests - Wear and fatigue

Inspection Tests – Wear and fatigue

Vibration Testing - Rough Handling

Rough handling shock tests

 

The Vibration and Shock Testing Guidebook has been written by qualified and experienced engineers with the specific aim of giving you “just enough” information. Your job is to get your product complying with the Vibration and Shock test standards. Our job is to give you the knowledge to get it done.

 

The Vibration and Shock Testing Guidebook is available for immediate purchase. Buy it now and have it in your inbox in seconds!

 

Don’t waste another minute. Better results, less time, no stress.